我们经过多次实践,利用一个报废的千分尺自己制作了一架“千分尺微分筒压离线调节器”。使用或修理时只要预先算好离线或压线的数值,转动“调节螺旋副”就可一次压,离线成功。现将调节器及使用方法简介如下(见右图) 首先测得千分尺的压线距离,然后将微分筒4拆下装在如图所示的调节器上。微分筒刻 After many times of practice, we made a “Micrometer Differential Cylinder Offset Regulator” with a scrapped micrometer. Use or repair as long as the pre-calculated off-line or pressure value, turn the “adjustment screw” can be a pressure, offline success. Now the regulator and the use of the method described below (see right) first measured micrometer crimping distance, and then the differential cylinder 4 removed installed in the regulator as shown. Differential cylinder engraved