论文部分内容阅读
EPSON等喷墨打印机都有一些相同的程序:当开机、换墨盒以及待印时间过长时,都会自动执行“清洗打印头”程序;当打印效果不好时,也要执行必要的喷嘴图案检查程序,作规定的“清洗打印头”操作。这些都要用全色(四色或者六色)的宝贵墨汁来清洗打印头,洗下的墨汁当成“废墨”全都排到机内的废墨舱中。在废墨舱中安置了大块的工业毛毡,用来吸附“废墨”,并在日后漫长的时日里,让“废墨”中的水分自然蒸发掉,“废墨”从此也就无影无踪了。 一、为“废墨”正名 笔者在接触EPSON C-40喷墨打印机初期,为降低昂贵的墨盒费用,自行尝试注墨使用。可不是想像的那么简单,老是“堵墨头”,于是就得反复开动清洗程序,呜呼,最后终于呈现
EPSON and other inkjet printers have some of the same procedures: When the boot, change the cartridge and to be printed too long, will automatically execute the “print head cleaning” program; when the printing is not good, but also to perform the necessary nozzle pattern check Program, for the provisions of “cleaning print head” operation. These should use full-color (four or six colors) of precious ink to clean the print head, wash the ink as “waste ink” all discharged to the machine’s waste ink tank. Large pieces of industrial felt were placed in the waste ink tank to absorb the “waste ink” and allow the water in the waste ink to evaporate naturally for a long time in the future Shadow disappeared. First, the “waste ink” was the name of the author in contact EPSON C-40 inkjet printer early, in order to reduce the cost of expensive cartridges, try to use their own ink. Is not that simple, always “blocking ink head”, so you have to repeatedly start the cleaning process, woo, and finally finally presented