细碎与粗磨一体化的制砂设备--中环粉碎机介绍

来源 :中国砂石协会2012年年会暨砂石行业创新与发展论坛 | 被引量 : 0次 | 上传用户:kbens
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  经过几十年实践和总结,粉碎领域正大力提倡“多碎少磨“新工艺流程。通过对粉碎机理和设备类型的分析,指出将破碎设备高效率的方式和简单结构形式与磨矿机不依赖排矿口尺寸大小控制粒度的方式相结合,开发出集细碎与粗磨一体化的、使成品在-3mm或-1mm尤其是-20目~+150目之间的粉碎设备——中环粉碎机,开创了一种“多碎少磨”新的途径。
其他文献
Standardized allergen extracts are necessary for detection and therapeutic purposes.This study was aimed at developing an optimized protocol for the extraction offish allergens (proteins).Twelve exist
Chinese traditional vinegars generally use qu as a starter for vinegar fermentation.Among them,Daqu is a famous starter.The complicated structure of unique microflora,which could not be investigated b
Do quantitative detection of talc-containing wheat flour using near infrared spectroscopy combined with BP neural network.Confect 50samples by adulterating talc to wheat flour,randomly selected nine s
会议
Marine bacteria are the enormous source of bio-controlling agents.On the basis of broad spectrum antimicrobial activity against both Gram-Positive and Gram-Negative food pathogens,among 230 marine bac
In this study,a HPLC-ESI (-) MS/MS methodology is developed for the residue determination of 3,4,5-Tribromosalicylanilide.The sample was extracted by the acetonitrile after and operating for decontami
The investigation of δ18O-values in wine water is used for origin assignment and as proof for the dilution of wines with water.For the assessment of the measured values,data of authentic reference win
本文介绍北京北方恒利科技有限公司开发的铸造工艺设计及模拟优化CASTsoft CAD/CAE在核屏敝箱体铸钢件工艺设计及优化方面的应用,同时介绍了水玻璃七0砂型(石灰石水玻璃砂型)在核屏敝箱体铸钢件上的应用;证明了用先进的科学技术,合理的铸造工艺,控制生产关健环节,采用铬铁矿砂作坭芯面砂能生产出要求较高的探伤核屏敝铸钢件。
在以往的铸造工艺设计过程中,冒口的位置和尺寸大小主要是靠工人积累的经验来决定。使用的冒口尺寸过大或位置过多,消耗金属液也多,对工艺设计人员的经验来说要求较高。为解决这一系列的问题,采用CASTsoft CAE软件对铸钢件进行缺陷分析,通过分析模拟铸造后的计算结果一缩松、缩孔缺陷图,判断铸件缺陷的位置,设置冒口和冷铁,建立冒口和冷铁体积最小的目标函数,得出原始冒口尺寸,再利用模拟软件进行优化,得到最
本文介绍了中国铸造材料行业的现状和存在问题,认为与发达国家相比,我国铸造材料企业生产水平高低不齐、自主创新能力不足、高端市场竞争力不强、产品集中度不高,其中最关键的是创新能力不足,而一个没有创新能力的国家将永远不可能成为真正意义上的强国,一个没有创新能力和核心竞争力的企业,即使很大,在市场竞争中也终将被淘汰,或者只能成为“打工者”。  从2011—2015年,为中国第十二个五年计划时期,也是中国铸