China's regional assessment of renewable energy vulnerability to climate change

来源 :第13届全国博士生学术年会——新能源专题 | 被引量 : 0次 | 上传用户:plbplbplb
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Renewable energy development is a major response to address the issues of climate change and energy security.The utilization of renewable resources, however, highly depends on the climate conditions, which may be impacted in the future due to global climate change.Based on literature analysis, this paper presents a general framework for renewable energy vulnerability assessment and applies grey cluster analysis method to demonstrate the features of vulnerability, and then employs the simple additive weighting approach to address the multiple-attribute decision problems of vulnerability assessment in China.The categorized results imply that the proposed index system is suitable for decision-making analysis and comparative analysis of renewable energy vulnerability to climate change in China.In terms of expo-sure part, the cluster results are complex and varied due to the unique combination of natural factors,social factors and the energy structure.In the sensitivity section, the results are presented on the distribution of areas rich in hydropower, wind power and solar energy potential.Moreover, the main results of this study are the higher renewable energy vulnerability of the poorer regions of China to climate change and the relative higher importance of adaptive capacity building in vulnerability management.Finally, policy recommendations on regional renewable energy vulnerability management are also made.
其他文献
Hybrid silicon/polymer solar cells promise to be an economically feasible alternative energy solution for various applications if ultra-thin flexible crystalline silicon (c-Si) substrates are used.How
基于有限元模拟(Finite Element Modelling,FEM)分析在不同太阳辐照度情况下光伏系统对屋面温度以及建筑室内温度的影响特征.比较分析覆盖有光伏组件与没有光伏组件的屋面温度和建筑室内温度,结果显示安装有屋面光伏系统的屋面平均温度相对低4.4—8.5K,并直接导致建筑室内温度比普通建筑低1.64~3.14K.光伏组件除了本身发电以外,对附加式光伏建筑具有隔热保温作用,在工程应用中
本文采用溅射后硒化工艺,研究了金属预制层合金化过程对背电极处MoSe2的生长的影响以及对Cu2ZnSnSe4(CZTSe)薄膜电池性能的影响.通过对金属预制层进行300℃的低温合金化处理,能够得到致密的Cu5Sn6合金薄膜.合金化过程结束后,在足量Se气氛中采用快速升温的过程能够得到致密的CZTSe薄膜.致密的合金薄膜和CZTSe薄膜在硒化处理过程中能够延缓Se元素向背电极的扩散,从而抑制背电极表
Organic photovoltaics (OPVs)were fabricated with blended active layers of poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b ∶4,5-b] dithiophene-2,6-diyl] [3-fluoro-2-[(2-ethyl-hexyl)carbonyl]thieno[3,4-b]th
二维材料与晶体硅形成的异质结太阳电池是当前太阳电池研究热点之一,大多数研究集中在石墨烯和硅形成的肖特基结太阳电池.为了改善器件的能带结构,在本工作中,采用禁带宽度可调的n-MoS2二维半导体材料与p-Si形成异质结器件.通过实验研究了退火时间对MoS2材料合成的影响,并对MoS2-Si异质结的暗电流和光电流曲线进行测量和分析.最后通过异质结模拟软件wx-AMPS对MoS2-Si异质结结构进行效率计
The microlens structure is pro-posed on macro photovoltaic glass substrate for high value-added micro-optic performance for thin film solar cell.The objective is to understand how the micro-optic beha
Solid sensible heat storage is an attractive option for high-temperature storage applications in terms of investment and maintenance costs.Typical solid thermal energy storage systems use a heat trans
本文通过单靶一步溅射再退火的办法在钠钙玻璃衬底与镀钼衬底上制备了铜铟硒(CIS)薄膜,通过优化工艺参数,获得了结晶性良好的CIS薄膜,在此基础上可进行下一步的Ga或Al元素的掺杂,重点分析研究了溅射沉积薄膜时衬底温度以及不同退火温度对薄膜结晶性的影响;发现衬底温度为150℃时,退火获得的CIS薄膜结晶性最好;不同的退火温度对Mo衬底上的CIS薄膜结晶性影响不大.实验反映出靶材致密度对溅射所得CIS
Wind power planning aims at optimally locating and sizing wind farms.Traditionally,it tends to choose the wind farms with the richest wind resource in order to maximize the energy benefit.However, the
本文研究了5MW级水平轴风力机叶片内侧的风力机翼型的设计准则,设计了四种适用于该部位的大厚度钝尾缘翼型.依据一个5MW风力机的运行特征,对于不同的翼型设定不同的设计雷诺数;另一方面,其设计目标针对实际运行范围内的升力变化特征,并把升力随雷诺数变化的稳定性作为主要约束.翼型族经正反方法结合设计得到,RFOIL预测表明,四种翼型的升力系数在15°到30°攻角之间,其升力系数大致在1.0到1.7之间以近