• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 会议论文
  5. Polyvinyl Alcohol/Carbon Nano-Tube/Potassium Hydroxide Electrolytes for Direct Methanol Alkaline Fue

Polyvinyl Alcohol/Carbon Nano-Tube/Potassium Hydroxide Electrolytes for Direct Methanol Alkaline Fue

来源 :第七届亚澳复合材料会议 | 被引量 : 0次 | 上传用户：alucardlr
【摘 要】
：
This study reports the cell performance of direct methanol alkaline fuel cells (DMAFCs) employing hydroxide conducting membranes.The membrane electrode assemblies (MEA) consisted of carbon-supported p
【作 者】
：
Shingjiang Jessie Lue Ying-Ling Liu Wen-Han Pan 
【机 构】
：
Department of Chemical and Materials Engineering,Chang Gung University,Taoyuan,Taiwan
【出 处】
：
第七届亚澳复合材料会议
【发表日期】
：
2010年4期
【关键词】
：
Nano-composites direct methanol alkaline fuel cells conductivity methanol cross- 
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
　　This study reports the cell performance of direct methanol alkaline fuel cells (DMAFCs) employing hydroxide conducting membranes.The membrane electrode assemblies (MEA) consisted of carbon-supported platinum/ruthenium for anode, platinum for cathode, and poly(vinyl alcohol) (PVA)/carbon nano-tube (CNT)/KOH membranes as polymer electrolytes.The CNT was grafted with PVA chains and PVA/CNT composite membranes were prepared using a direct mixing process and solution casting method.
其他文献
Improving the Strength of Composite Joints from Interface to Fiber Dominated Load Transfer
The fracture modes and failure mechanism of joints are critical in determining their strength.For fiber-reinforced composite joints, fiber-dominated failure will result in quasi-static and fatigue str
会议
Composite JointsFree-edge delaminationTestingNon-destructive EvaluationStren
Thermo-Mechanical Interaction Effects in Composite Sandwich Structures-Finite Element Analysis vs.Hi
Polymer foam cored sandwich structures are being used increasingly for a variety of applications including wind turbine blades, boat hulls and ship structures to mention a few.Sandwich structures are
会议
Sandwich structuresThermal degradationNonlinear interaction effectsFinite Ele
Fabrication and Mechanical Response of Ti/APC-2 Hybrid Nanocomposite Laminates at Elevated Temperatu
It is well known that debonding, transverse cracking, shear cracking, fiber breakage and delamination are common failure mechanisms in composite laminates.Those failure mechanisms are detrimental not
会议
composite laminatehybridnanotemperaturefatigue
Thermomechanical Interaction Effects in Composite Sandwich Structures-Initial Experimental Analysis
An experimental study of the effect of increasing temperature on the tensile modulus of PVC foam is presented.The focus is on obtaining reliable measurements of specimen deformation using optical tech
会议
Sandwich structuresThermal degradationMechanical propertiesDigital Image Corr
Numerical and Experimental Characterization of High-Speed Impact Damage in CFRP Unidirectional and C
This paper aims at characterizing the high-speed impact damage behavior in CFRP unidirectional (UD) and cross-ply (CP) laminates.First, high-speed (150-600m/s) impact damage was introduced by collisio
会议
CFRP laminatehigh-speed imapactdelamination
Evaluation of Transverse Crack Initiation in Cross-ply CFRP Laminates under High-Cycle Fatigue Loadi
This paper focused on the initiation of a transverse crack in CFRP laminates under fatigue loadings.Transverse cracks induce more serious damage, such as delamination or fiber breakage.It is essential
会议
CFRPfatiguetransverse crackinitiation
Principal Master Diagrams for Fatigue of a Unidirectional CFRP Laminate at Room Temperature
The constant fatigue life (CFL) diagrams for a unidirectional CFRP laminate in the in-plane principal directions are identified.The anisomorphic CFL diagram approach, which was found to be valid for m
会议
Unidirectional CFRPConstant Fatigue Life DiagramPrincipal Master DiagramsModi
Optimising Phase Transformational Toughening of Polypropylene Pipe Coatings
It is essential to improve the fracture toughness of polypropylene (PP).While the addition of an elastomer is one of the most effective methods, typical concentrations of more that 15wt% of elastomer
会议
Toughening PolypropylenePhase transformationBeta nucleating agentImpact stren
Low-Velocity Impact Induced Damages in Titanium/GFRP Hybrid Laminates
This article evaluates the impact-induced damages and influence of titanium skin layer on impact damages in FRP layer of Fibre-Metal Laminates based on titanium alloys and glass fibre-reinforced polym
会议
Fibre-Metal LaminatesHybrid titanium composite laminatesLow-velocity impactIm
The Ballistic Characteristics of T300/Epoxy Composite Laminates
In order to investigate the ballistic characteristics of T300/epoxy composite laminates, three kinds of stacking sequence composite laminates were impacted by a projectile with a velocity of 10-300 rn
会议
composite materialsimpactenergy absorptiondamage