Effect of hydrogen isotope exchange by ion cyclotron wall conditioning in EAST

来源 :第13届中日双边先进能源系统和聚变裂变工程材料会议(CIS-13) | 被引量 : 0次 | 上传用户:lv_dan1102
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Ion cyclotron wall condoning(ICWC)is a candidate wall conditioning methods under strong magnetic fields in ITER and DEMO [1-2].Advantages of ICWC are removals of hydrogen isotopes on surfaces of plasma facing materials.In ITER and DEMO,wall conditioning techniques for control of wall recycling,remained tritium and fuel dilutions into tritium blanket modules are required.
其他文献
Beryllium is a simple alkali earth metal,but has been the target of intensive studies for decades because of its unusual electron behaviors at surfaces.Puzzling aspects include(i)severe deviations fro
In the molten salts reactor,certain fission products will dissolve in the fuel salts,thus can transfer in the reactor vessel and primary loop to interact with the structural materials.Historical resea
Fabrication of a thin ceramic coating as a tritium permeation barrier on structural materials is a promising solution to mitigate tritium loss in fusion fuel breeding/recovery systems.Yttrium oxide(Y2
Silicon carbide(SiC)is an expectant candidate of structural materials for fusion reactors after Demonstration Power Plant(DEMO).The SiC/SiC composites are considered to be used for the structural mate
SiC/SiC composite is a promising candidate functional and structural material for fusion reactor system.The Nano-Infiltration and Transient Eutectic-phase(NITE)method is one of the most attractive pro
Excellent irradiation stability has been reported for SiC at wide temperature ranges and damage levels under neutron irradiation.The Fukushima accident once again stimulated the research a fuel materi
SiC fiber reinforced SiC matrix(SiC/SiC)composites are reliable high temperature structural materials due to their enhanced fracture resistance compared to those of monolithic SiC.Thus,there were many
According to the fusion blanket concepts with liquid tritium breeding materials,the development of a functional coating as a tritium permeation barrier with corrosion resistance is required.In our pre
The ternary layered MAX-phase materials combining the merits of both metals and ceramics,which could have high radiation damage tolerance and novel damage self-healing abilities due to their special s
Tungsten(W),which possesses higher energy threshold for sputtering,low ability to hydride formation and low hydrogen solubility level,has been selected as the most likely candidate of plasma facing ma