2. 您的位置
3. 首页
4. 会议论文
5. The Effect of Dynamic Etching on Surface Quality and Laser Damage Resistance for Fused Silica Optics

The Effect of Dynamic Etching on Surface Quality and Laser Damage Resistance for Fused Silica Optics

来源 :LIMIS 2016——The 4th International Symposium on Laser Interac | 被引量 : 0次 | 上传用户：bat_wing

【摘 要】

：

Laser damage induced by ultraviolet (UV) laser irradiation on fused silica optics seriously limits the lifetime of optical elements and the maximum output fluence of high power/energy laser systems.

【作 者】

：

Wang Zhiqiang Yan Hongwei Li Yuan Yuan Xiaodong Yang Ke Yan Lianghong Zhang Lijuan Liu Taixiang Li Heyang 

【机 构】

：

Research Center of Laser Fusion, China Academy of Engineering Physics,Mianyang, 621900, China;Gradua

【出 处】

：

LIMIS 2016——The 4th International Symposium on Laser Interac

【发表日期】

：

2016年8期

【关键词】

：

fused silica dynamic etching laser-induced damage surface roughness 

下载到本地 , 更方便阅读

下载此文 赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Laser damage induced by ultraviolet (UV) laser irradiation on fused silica optics seriously limits the lifetime of optical elements and the maximum output fluence of high power/energy laser systems.

其他文献

System Alignment of High-power Laser Device

With the development of high-power solid laser technology,new generation huge laser device is decuples of former scale.Unit modularization is the basic principle for the construction of new generation

会议

System alignmentHigh-power Laser DeviceNifSG-Ⅲ laser facility

Controlling of Thermal Influenced Regions in the Damage Mitigation Processing of Fused Silica Optics

For the high-power solid laser facilities,the laser-induced surface damages of fused silica optics exposed under ultraviolet (UV) laser at the terminal optical assembly intensively restrict the maximu

会议

Fused SilicaDamage MitigationCO2 laserResidual Stress

Fast Processing and Imaging of Two-Dimensional Materials

We developed a novel laser-based method for direct writing arbitrary 2D material (such as graphene) patterns on glass substrates in open air without the use of vacuum chamber as usually required by ch

会议

laser direct writingfast imaging2D materialsnonlinear imaginglaser thinning

Surface Treatment Technologies for Improving Laser Irradiation Damage Resistance of Large Aperture F

Increasing output energy of laser driver is one of the main challenges in the development of laser inertial confinement fusion.

会议

large aperturefused silicaoptical elementssurface treatment technologies

Cleaning mechanism of particle contaminants on large aperture optical components by using air knife

Based on the dynamic equations and JKR model,the process of free sedimentation of the particle contaminants in the light pneumatic tube and the cleaning mechanism of optical surface particle contamina

会议

numerical simulationoptical surfaceparticle contamination cleaningair knife s

Experimental research of material removal during double-pulsed (ms and ns) laser drilling

Laser processing has the advantages of high precision,high efficiency and high quality.With the development of short-pulse and ultra short-pulse laser,more and more manufacturing problems have been so

会议

laser drillingdouble-pulsed lasermorphology of holes

Controlling nanocrystal orientation in silica-based glass by femtosecond laser irradiation

Femtosecond (fs) laser direct writing of bulk transparent material has attracted great interest because of its unique properties and promising applications in optics.

会议

ultrafast phenomenasecond harmonic generationnano-opticsoptical nonlinearitie

Laser additive remanufacturing: research results and development trends

Laser additive remanufacturing process is a very promising process for rapid repairing of complex workpiece because of the high performance and high efficiency.

会议

Laser additive remanufacturingalloy powdergas-powder feeding systemsresearch

5kW monolithic continuous wave near diffraction-limited fiber laser directly pumped by laser diodes

We report a monolithic continuous wave (CW) fiber laser source at 1080 nm,producing > 5 kW average laser power.The laser consists of a CW fiber laser oscillator and one double cladding (DC) fiber ampl

会议

The Formation Mechanism of Femtosecond Laser Irradiated Periodic Micro-Nano Structures on Stainless

Metals with micro-nano structures normally have unique properties,e.g.self-cleaning,anti-microbe,anti-relection and broad spectrum absorption etc,and can be potentially applied in food industry,airosp

会议

Micro/nano structurePeriodic structureStainless steelFemtosecond laser