2. 您的位置
3. 首页
4. 会议论文
5. Influence of aging temperature on microstructure and mechanical properties of SiCp/Al-Si matrix comp

Influence of aging temperature on microstructure and mechanical properties of SiCp/Al-Si matrix comp

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：Wang_Sheng

【摘 要】

：

　　The mass fraction of 30% SiC particles reinforced Al-Si matrix composite was prepared by One-way press method, sintering and hot extrusion.The microstructur

【作 者】

：

HANHuihui[1]WANGAiqin[2]XIEJingpei[2] 

【机 构】

：

School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 47102

【出 处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年期

下载到本地 , 更方便阅读

下载此文 赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　The mass fraction of 30% SiC particles reinforced Al-Si matrix composite was prepared by One-way press method, sintering and hot extrusion.The microstructure and mechanical properties of SiCp/Al-Si matrix composite under different aging temperatures were investigated by means of SEM and XRD, tensile test analysis.

其他文献

Influence of Sintering Temperature on Properties of M2052 Alloy Prepared by Powder Metallurgy

　　Manganin alloy is a kind of twin type high damping alloy.Studies have reported the manganin alloy has good damping capacity and excellent mechanical propert

会议

Study on in-situ metallization of carbon fiber surface

　　The copper salts on carbon fibers(Cf) surface can be reduced to native copper in hydrogen gas atmosphere, while under the high-temperature environment.Compo

会议

Thermal Expansion Characteristic of CNTs/7075 Composites Prepared by Friction Stir Processing

　　7075 based composite reinforced with carbon nanotubes was prepared by friction stir processing.The thermal expansion coefficient of CNTs/7075 composite with

会议

Fabrication, welding and service evaluation of B4C/Al neutron absorbing material

　　Due to high boron content and low density, new B4C/Al neutron absorbing material is widely used for storage and transportation of spent fuel in place of B-c

会议

Effect of the content of carbon nanotubes on the mechanical properties of Aluminum Matrix Composites

　　Aluminum matrix composites reinforced by multi-walled carbon nanotubes (MWCNTs/Al) were fabricated by friction stir processing, and effect of content of MWC

会议

Modification of rare earth B4C reinforced copper-based electrical contact material: Properties and p

　　The high-performance copper-based electrical contact materials were prepared via B4C modified by rare earth salt as reinforced agent.The properties were obt

会议

Deformation coordination of 06Cr19Ni10/Q235 clad composite materials under uniaxial load at room tem

　　In the present work, 06Cr19Ni10/Q235 clad composite materials are selected as the target materials.Then the deformation behavior, the surface deformation an

会议

Hot deformation mechanism and constitutive modeling of SiCp/2009Al composites

　　The present work studied hot deformation mechanism of powder metallurgy processed 17%vol.SiCp/2009Al composite via hot compression tests.The processing map

会议

Fabrication and properties of Al-based hybrid composites reinforced with SiC micro-particles and SiC

　　Hybrid reinforced aluminum matrix composites were fabricated by powder metallurgy method, with a controllable volume fraction of micro-sized and nano-sized

会议

Thermal conductivity of SiCp/Al composite with different SiC particle size and volume fraction

　　In order to study the effects of SiCp size and volume fraction on thermal conductivity of SiCp reinforced aluminum matrix composites, SiCp/2024Al composites

会议