【摘 要】
：
Cement is the most used material in the world.Thanks to its low cost, it is he only material that can satisfy the growing demand for infrastructure, especially in developing countries.However, the pro
【机 构】
：
Department of Civil and Environmental Engineering, University of California, Los Angeles, CA 90095,U
【出 处】
：
The 14th International Congress on the Chemistry of Cement (
论文部分内容阅读
Cement is the most used material in the world.Thanks to its low cost, it is he only material that can satisfy the growing demand for infrastructure, especially in developing countries.However, the production of cement is responsible for about 7% of the global emissions of carbon dioxide in the atmosphere.Because of such a ubiquitous presence in our environment, only a small decrease in its production would have a significant impact in terms of greenhouse gas emissions.To this end, one option is to improve the hardness and toughness of cement.Indeed, harder and tougher cement would allow using less material while achieving comparable mechanical properties.Moreover, an increased resistance to fracture and permanent deformations would improve its longevity, making it more sustainable.
其他文献
This study has the purpose to investigate the action of Magnesium Chloride (MgC12), which is present in the rocks of the salterns pre-salt layers, when it is incorporated to the Portland cement of G c
The alite phase in Portland cement contains different foreign ions.In this work, the effects of magnesium and zinc on the polymorph, hydration kinetics and hydrate morphology of C3S are investigated.I
Ordinary portland cement (OPC) is prone to react with water, even upon premature contact as may occur during storage or handling.Such contact with water, in the liquid or vapor states, results in chem
Groundwater contamination by various toxic substances is exposed and has become an important issue in water treatment.Particularly high-concentration arsenic pollution area are distributed in the Sout
The effects of three kinds of particle size colloid nano-silica(CNS) with 30nm,60nm and 140nm on the rheological behaviour, hydration characteristics and microstructure of cement paste were investigat
Polymer dispersions are widely used in cementitious materials, known as polymer-modified mortar (PCM) or concrete-polymer composite (CPC).The composite is thus composed of two binders, polymer and cem
The well-known accelerating effect of mineral salts on the hydration of alite, the main component of portland cement is revisited in this work.The objective of this study is to identify the mechanisms
Densified cement systems were developed in the early 1980s, about three decades past.The research led to historical developments in cement and concrete research, forming the baseline for the design of
This work studies how nanosilica particles interact with a commercial dispersion of non-functionalized carbon nanotubes rich in surfactant and how this combination affects the pozzolanic activity of t
The hydration kinetics of Portland cement is known to be relatively insensitive to water-to-cement (w/c) ratio changes through experimental observations such as isothermal calorimetry tests and chemic