Macroscopic and microscopic residualstresses in frictionstir welded particlereinforced metal matrix

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户:xiamen88
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Residual stresses in friction stir welded (FSWed) particle reinforced metal matrix composites (PRMMC) affect the dimensions, the shapes and the performances of the FSWed joints significantly.However, the residual stresses in PRMMC include the macroscopic and microscopic residual stresses, and the microscopic residual stress includes the elastic mismatch,thermal misfit and plastic misfit residual stresses.
其他文献
By establishing the representative volume element (RVE) model of three-dimensional (3D) six-directional braided composites, stiffness prediction of the composite under different braiding angle and fib
MnO作为一种过渡金属氧化物,其比容量高(理论容量756 mAh·g-1,是石墨的2倍)、密度大(5.43g·cm-3)、电动势低(1.032Vvs.Li+/Li)、环境友好[1].而广西的锰资源占全国锰矿资源的三分之一,居全国首位,高附加值MnO/C负极材料的开发,可为锰资源的开发利用提供新的发展思路,促进我国及广西锰资源的深加工利用,具有良好的应用前景.针对目前文献中报道的MnO负极材料存在电
会议
Lithium-ion batteries are widely used in modern instruments and devices because of their long lifetime,environmental benignity and high energy density.In recent years,intensive research has been condu
会议
Despite most porous silicon-based anode materials manifest excellent lithium-ions storage properties and have great potential application in the next generation lithium-ion batteries,the scalable and
会议
目前商业化锂离子电池负极材料多使用石墨类碳材料,由于受到材料比容量低的限制(石墨类碳材料的理论容量仅为372mAh/g),不能满足高容量锂离子电池的需求.过渡金属氧化物具有较高的可逆比容量( 500-1OOOmAh/g),作为锂离子电池负极材料早有研究,但工作电压较高.复合过渡金属氧化物能综合运用各种单一过渡金属氧化物的电化学活性,很有可能成为下一代极具潜力的高比能量、高比功率锂离子电池负极材料[
会议
As the increasing demands for large-scale energy applications such as electric vehicles(EVs) and hybrid electric vehicles(HEVs),it is critical to develop electrodes with high capacity and rate capabil
会议
Natural fiber reinforced composites undergo remarkable mechanical degradation with large amounts of moisture absorption.Existing experimental evidence shows that such mechanical degradation largely de
This paper presents the development of a highly efficient method for analyzing load distributions in multi-bolted composite joint using 2D-FE model.In the model, the bolt was modeledby using a fastene
In this paper, the research on structure buckling performance due to stiffeners on the composite domed rear pressure bulkhead of civil aircraft is finished.According to establish two categories struct
Composite stiffened panels is easy to lose stability on the compression loading, the composite stiffened component is very important for loading transfer as the key components of composite stiffened p