【摘 要】
：
Acrylonitrile (AN) and itaconic acid (IA) were used to synthesize UHMWPAN by aqueous suspension method with 2,2-azobisisobutyronitrile (AIBN) as the initiat
【机 构】
：
KeyLaboratoryofHighPerformanceFibers&Products,MinistryofEducation,DonghuaUniversity,Shanghai,P.R.Chi
【出 处】
：
2014全国高性能纤维及复合材料新技术应用与产业化推进研讨会
论文部分内容阅读
Acrylonitrile (AN) and itaconic acid (IA) were used to synthesize UHMWPAN by aqueous suspension method with 2,2-azobisisobutyronitrile (AIBN) as the initiator and polyvinylalcohol (PVA) as the disperser at different temperatures (55℃~75℃) for different timings (1.0h~3.0h).The usage amounts of AN,IA,AIBN and PVA were also technical polymerization parameters used to obtain the optimal polymerization process.We found that the conversion and the viscosity average molecular weight both achieved the optimum levels when the conditions were as follows: the total monomer concentration (21wt%),the monomer ratio (AN∶ IA=98∶2),the usage amount of the initiator (AIBN,0.01wt%),the usage amount of the disperser (PVA,0.1wt%),the polymerization temperature (70℃) and the polymerization time (2h).
其他文献
20Mn23Al属于C-Mn-Fe系奥氏体钢,其特点是具有良好的强韧性、优异的无磁性,并具有一定的耐氧化性,成本相对低廉,整体综合性价比高于不锈钢,是矿热炉炉体用钢的可选优良材料.
研究气调贮藏对双孢蘑菇的保鲜作用.样品分别用真空包装、O21％+CO225％、O25％+CO220％、O28％+CO210％处理双孢蘑菇.在温度为2℃、相对湿度90～95％的条件下贮藏,测定和比较贮藏期间失重率
以"大五星"枇杷为试材,采摘预冷后,用0 mg/m3、100mg/m3、150 mg/m3、200mg/m3臭氧进行处理,每周处理一次,每次30min,在3℃的冷库中贮藏30天,测定贮藏过程中枇杷果实的各项生
目的：本研究通过分析使用葡萄糖苷酶处理前后的"媚丽":葡萄品种酿制的葡萄酒中的香气糖苷成分,对比香气糖苷成分的在糖苷酶处理前后的改变,为该品种的增香酿造工艺的设计提供
对九种国内外蜂胶75％热乙醇提取液用UPLC-Q-TOF-MS进行了一级阳离子化[M+H+]总离子流色谱(TIC)和总质谱(色谱和质谱指纹)的采集分析.色谱峰有无及形态特征结合峰内物质的质荷
为了开发天然、安全、环保的防褐变剂,以洋葱、萝卜、甘草的提取物为抗氧化剂对苹果梨汁褐变抑制效果进行研究.结果表明:洋葱提取物加热50 min,浓度为30 ml/L时防褐变效果最
本文介绍了普鲁兰糖特殊的理化和生物学性质,重点讨论了普鲁兰糖在果蔬、水产品、高脂食品及其它领域保鲜中的应用.普鲁兰糖用于食品保鲜兼具安全性和有效性,值得深入研究和
产地初加工是解决南方刺参散、小、多的养殖现状、稳定刺参收购价格、保障养殖户利益的重要途径.本文介绍了目前南方刺参养殖产地初加工的意义和主要模式,讨论了南移刺参产地
碳纤维增强(树脂基)热塑性复合材料(Carbon fiber reinforced thermoplastics,CFRT)属于高性能的碳纤维工程塑料复合材料,具有高比强度、高比模量、抗冲击性好、模收缩率低、
Ultra-high molecular weight polyacrylonitrile (UHMWPAN) powders were synthesized by aqueous suspension polymerization with different AN/IA ratios using α,